Kill Odour Plus

Kill Odour Plus Characteristics

pH @ use: 5.0 ‐ 8.0

Coverage: Various on application

Dilution: 360ml ‐ 960 ml to 3.78 Litres

Appearance: Clear Yellow Liquid

Fragrance: Floral

Packaging: Case 4 x 3.78 Litres

Tip & Hints

Hot water extraction

Pre‐spray area to be cleaned at a rate of 1000²ft per gallon, agitate Kill Odour Plus thoroughly into the carpet’s pile, allow 10 minutes dwell time then extract with an extractor using hot water and DFC 105 in the machine.

Hot water extraction should be used a minimum of every 4th encapsulation cleaning, more dwell time will be beneficial when strong odours are present.

Daily maintenance

Mop tile and grout liberally especially around urinals and toilets, allow 10 minutes dwell 􀆟me

then using a clean damp mop and fresh cold water rinse the floor. Allow the floor to dry before putting the restroom back in service.

Unique deodoriser

A unique combination of solvents, anionic surfactants and a proprietary fragrance that quickly penetrates urine salts and emulsifies oils producing an excellent clean without harming

carpet fibre or voiding carpet manufacturer warranties.

Directions for use on carpets

Apply a small amount of cleaner to a clean, white cloth and gently blot test area. If no colour

transfers to cloth or no change in original fabric occurs, continue with directions.

Spot Removal: Blot and agitate the spotting solution. Allow 5 minutes dwell time then extract or rinse with water.

Heavily Soiled Traffic Lanes: Pre‐spray area to be cleaned at a rate of 200 to 400 sq. ft per gallon agitate Kill Odour Plus thoroughly into the carpet’s pile, allow 10 minutes dwell time then extract with an extractor using hot water and DFC 105 in the machine.

Interim Cleaning – Encapsulation Process: Pre-spray area to be cleaned at a rate of 1000 sq. per gallon, agitate the pre‐spray thoroughly into the carpet’s pile, allow product to dry before vacuuming.