Scrubber dryer range
April 1st 2004

With the latest B 655, B 755 and B 855 designs of the Hakomatic range, Hako Bad Oldesloe presents a modular concept of machines from which the customer may choose his special scrubber-drier adapted to the different conditions of use. All basic versions of the appliances are available with three different working widths (650, 750 and 850mm) thus allowing a area performance of up to 4675m2/h. Thanks to the flexible tank pane, the Hakomatic is compact and manoeuvrable with a maximum tank volume (85 litres) at the same time. The integrated Aqua Control System ensures electronic lye dosage and the Aqua Stop water retaining rings at the brushes reduce the water and the cleaning agent consumption by up to 50%, significantly reducing the service life costs while increasing the operation times. The green Hakomatic key allows activation of all operational functions such as scrubbing, supplying water or lifting and lowering brushes by one single key action. This helps not only to shorten training times of your personnel but excludes maloperation as well. The optional on-board charger, the pre-sweeper unit or the adapter for manual cleaning increase mobility, avoids additional working cycles and makes even the farthest areas accessible for thorough cleaning. For use in hospitals, old-peoples homes or other noise-sensitive area, the Hakomatic B 655, B 755 and B 855 are available in a clinic version with special white coating. These variants comprise dead sounding packs and specific accessories such as transport case, mop holder or a squeegee with additional brush strip. Hako introduces the Hakomatic B 655 S for cleaning restricted areas with medium running time requirements. As a plug-and-clean version, this scrubber-drier is available with pre-mounted brush head, squeegee, maintenance-free 100Ah Gel batteries and a stationary charger unit. Only the brushes are left to be selected according to the conditions of use. The fixed pane tank of the Hakomatic B 655 S holds 75 litres of lye, the running time amounts to up to 90 minutes and with its working width of 65cm ensures up to 3250m2/h of cleaning. As with the other machines, this solution has easy operation combined with optimal protection against maloperation, easy maintenance and a long service life with low service life costs at the same time.

More articles from Hako Machines Limited: