Heavy duty scrubber/dryer/sweeper
December 1st 2008 Nilfisk says its heavy duty CR1000 combination unit makes light work of tough jobs
Acompact design and high cleaning efficiency make Nilfisk's
new CR 1000 combination scrubber/dryer and sweeper adept
at dealing with dust and dirt in manufacturing plants,
warehouses,workshops, car parks and other mid-duty industrial
cleaning applications.Measuring 221 x 117 x 132cm, the ride-on can
turn within a 240cm wide aisle and can be used in hard-to-reach or
congested areas.
There's a choice of two models to suit different cleaning demands:
The standard CR 1000 with a rated power of 4750W and two 510mm
scrubbing discs; or the 6020W CR 1000XL, which is fitted with three
410mm discs. Both models are battery-driven, so can be used inside
or outdoors, and have a running time of up to four hours.
Nilfisk's CR 1000 combination machines deliver cleaning
performance and productivity that match much larger models, with a
brush pressure up to 90kg and a theoretical cleaning rate of
7,500m2/h. A double vac squeegee system leaves floors dry and safe
after cleaning, and the squeegee swings out on turns to pick up any
excess water.The machines also benefit from Nilfisk's 'no tools'
servicing concept for the brush, broom and squeegee to minimise
maintenance, and operators have easy access to battery packs for
speedy changing as required.
Developed to withstand the rigours of industrial environments,
Nilfisk's CR 1000 CR 1000 combination scrubber/dryer and sweeper
features a heavy duty steel construction and bumpers, plus a
powerful hydraulic system to drive the main broom, scrub deck and
squeegee.The 71 litre hopper is also hydraulically driven and can
handle light and heavy debris.As an added convenience, the
hopper's 'low dump' design means it can be emptied at a height of
35cm, enabling easy cleaning.
Like all Nilfisk cleaning equipment, the CR 1000 combination
floor cleaners have an ergonomic and user-friendly design. Both
the steering wheel and seat can be adjusted to suit individual
operators, and a simple control panel makes the machines easy to
use with the minimum of
training. More articles from Nilfisk -Advance Ltd: | 
